Specifications:

Panel Type: 21.5” IPS Screen

Resolution: 1920*1080 FHD

Display Color: 16.7M(6bit+FRC)

Visual Angle: 178° Full View Angle

Contrast Ratio: 1300:1

Brightness: 300 cd/㎡

Refresh Rate: 120Hz

Touchscreen :10-point Touchscreen

NTSC: 72%

sRGB: 100%

Response time : 16ms

Product Size: 494 × 289 × 19 mm (19.45 × 11.38 × 0.75 inch)

Net Weight: 1.67 kg (3.69 lbs)

Bulit-in Speakers: Dual 8Ω 1W Speakers

Input Interface:
1 * HDMI (signal source)
2 * Type-c (fully functional)
1 * 3.5mm headphone jack

VESA:75mm*75mm

Screen Type: Mirror Touchscreen

Stand Holder :Yes

Cover Case: No

Built-in Battery :No

Gravity Sensor :No

Q: why does my monitor not turn on?

1.Please check whether the Type-C port of your device is a full-featured Type-C port,which can support power and signal transmission. If not, please use HDMl to MiniHDMl cable to transmit video signal, and use USB-C to USB-C cable to connectexternal power supply.

2.This may be caused by insufficient power supply.The minimum power requirementfor the monitor is PD 18W.Especially when you need to run the display at 2K 120hz,the power consumption will be relatively large, it is recommended to use an externalpower supply , otherwise the monitor may not work properly.

3. lf the above steps still cannot solve your issue, please feel free to contact us.

Q: lt says "no signal" , what to do?

1.When connecting with a USB-C cable, make sure your device supports USB3.1./Thunderbolt 3.lf not, please add a Mini HDMl to HDMl cable for signaltransmission.

2.Please make sure to use the original cables.

3.Please try another device.lf it still fails, please tell us for a replacement.

Q: why does my monitor turn off when lturn up the brightness?

This is caused by insufficient power supply.Turning up the brightness will increasethe power consumption, which can be solved by an external power supply.

Q: Abnormal conditions occurred -such as a splash screen, spots when using themonitor or constant restarts.

1.lt is generally caused by an insufficient power supply.The monitor require highpower support.Please use the original cable included to power the monitor.

2.lf you use a mobile power bank to power the monitor, please confirm whether thepower of the power bank reaches 30w or more.In addition, if you need a power bank,please contact us at Aarr-customerservice

3. If none of the above solutions work, please try another device. lf it still failed,please contact us for a replacement.

How to get touch function?

1. When the devices you connect with the monitor own a Type-C 3.1 port, you can get the touch function just using a C-C cable to connect.

2. When you connect the device with the monitor through mini HDMI port, please use the A-C cable to plug in the Type-C port on the monitor for the touch function. And don’t forget to plug in power adapter.

3. When connect to phones without Type-C 3.1 port or iphone, you would need an ios/android to HDMI adapter and a mini HDMI to HDMI adapter to connect to the monitor for signal transmission. And please check what the port is on your devices and note that there will be NO TOUCH function in this case. Please make sure you don’t mind before you place an order.

4. We recommend you to plug in the original power adapter to get sufficient power for the monitor and work smoothly. Or it would have some issues such as flickering, on-and-off and so on.

lmportant Tips:

lf you find any issues with your monitor, please contact us at Aarr-customerser-vice before returning it. We will help you solve your problems and tryour best to make you satisfied.We take full responsibility for our products.
lf there are any defects that cannot be solved, we will refund or send you areplacement.